Strafix - Heat Insulation Board Adhesive / Plaster

  • Strafix - Heat Insulation Board Adhesive / Plaster
Strafix - Heat Insulation Board Adhesive / Plaster

Advantages:

  • Easily applied, providing perfect adhesion
  • Resistant to water and frost
  • Not affected by temperature changes
  • Flexible
  • Provides high stability, does not cause sagging and cracking
  • Allows water vapor diffusion
  • Paint can directly be applied on top of it
  • Enables both bonding and plastering applications with the same product

Product Features

Preparation of the Surface:

Special attention must be given that the application surface is cured. Both the application surface and the plates must be sound and clear of materials which prevent bonding, such as dust, oil, paint, silicone, curing agents and detergents. The application surface must be wet and kept moist. If used as plastering mortar, the plates to be plastered must be sound and fixated well, and the gaps between them must be filled with PU 960 Multi-Purpose Polyurethane Foam or with the same material. Preparation of the Mortar:

25 kg of STRAFIX Heat Insulation Plate Plastering and Adhesive Mortar is added to approximately 6 - 7 liters of clean water and mixed by a mixer with low speed or with a trowel, until there are no lumps. Prepared mortar should be left to mature for 5 - 10 minutes, mixed again before use. The mortar must be used within 1.5 - 2 hours.

Consumption:

3 – 4.5 kg/m2 (Varies depending on the application method.)